Knowledgebase
|
Daylight simulation has been aborted (DesignBuilder v6).
Posted by Luis Sousa on 20-Jun-23 11:43 AM
|
||||
|
Please contact our support team if you are getting this error in version 7. When running an Annual daylighting simulation in DesignBuilder version 6 and the following error is displayed:- An internal error has occurred. Daylight simulation has been aborted. To fix this please unzip the attachment and replace the file ds_el_lighting.exe at the installation folder C:\Program Files (x86)\DesignBuilder\Daysim\bin See image below for reference.  Then run the Annual daylighting simulation. | ||||
|
||||