In some cases CFD results display can fail due to memory issues. This
is more likely to occur when running long DesignBuilder sessions. See
below for our suggestions to address this.
1. First check that DesignBuilder is running with the high spec GPU
(de...
One common cause of CFD simulations not converging is when there are
insufficient grid cells between an extract and a supply diffuser. When
these components are positioned too close together, the flow can
become trapped and to avoid this situation, we rec...
* How is the MRT (Mean Radiant Temperature) calculated in CFD when
component blocks are drawn in the domain if the components have no
boundary condition?
If the component block temperature hasn’t been set explicitly, the
assumption is that the componen...
You can export the CFD slice values to a csv file by clicking menu
File>Export >Export CFD results slices.
See image below.