Setting up Boundary Conditions for Internal CFD

There are two methods for specifying boundary conditions within the internal CFD domain:

1. Enter the required parameters directly in the CFD tab under model data.
https://designbuilder.co.uk/helpv7.3/#CFDModelData.htm

2. Use the CFD Boundary Conditions Editor to import boundary conditions for a specific snapshot from the EnergyPlus annual simulation results.
https://designbuilder.co.uk/helpv7.3/#BoundaryConditionsEditor.htm

If you use the first method, review your input data carefully, as the default program values may not accurately reflect the conditions you intend to analyse.