Knowledgebase
Convert model from SBEM v6.1 to v5.6
Posted by Luis Sousa on 27-Jan-23 05:01 PM
|
|
DesignBuilder does not support forward compatibility and this means that it's not possible to load models saved in newer versions into older releases. See: DesignBuilder dsb file version compatibility The workaround to move the geometry to an older version is: 1. Open DB v7.1 and load the v7.1 model, 2. Export the geometry using the Export gbXML model option (File >Export) See image below: 3. Uninstall DBv7 and install DBv6.1, and create a new project, Here is the link to the installer DesignBuilder v6.1.8.021 4. Import the geometry using the Import 3-D model toolbar option and select the previously saved gbXML file. See image below: 5. Set the Geometry template to reinstate the zero wall thicknesses. 6. Enter the SBEM input data again (Construction, HVAC, Lighting, etc.) | |
|