BRUKL reporting accuracy of Specific Fan Power

Related Articles:

BRUKL Ventilation Reporting : DesignBuilder Support

Specific Fan Power (SFP) which is reported in the Zone Level Mechanical Ventilation table is rounded to 1 decimal place. 

However 

• BER, BPER & BDER calculations will use the figure input in the interface. 
• A compliant input will display in green
• A non-compliant input will display in red

For example the following input

Generates the following on the BRUKL Report

For Centralised Ventilation systems the Specific Fan Power is rounded to 2 decimal places:

For example:

Is reported on the BRUKL as