EPC Convention 6.06 DHW serves multiple buildings (DSM)

Related Articles:

EPC Convention 6.06 DHW serves multiple buildings (SBEM)

DesignBuilder DSM uses broadly the same calculation to derive storage losses however this data is not available in any output file. There are two options to generate this data:
1. Switch over the analysis type to SBEM in Model Options and then follow the procedure above


2. Use the attached spreadsheet:
   a. Download the spreadsheet attached to this article. Copy to your project folder. Input:
        i. Total Floor Area served
        ii. Assessed Floor Area served
        iii. Cylinder Volume
        iv. Insulation type (single letter)
        v. Insulation Thickness


   b. Enter MJ/month (assessment) into the HWS dialogue: